How to reprogram Yezz E425

Pre-Requirements:

• Make sure battery percentage is more than 60%
• Install the VCOM driver on your phone.
• Install ADB & Fastboot drivers on your computer. Guide: For Windows or For Mac or Linux
• Now Enable Developer option.
• Create a nandroid backup on your device.

Download Yezz E425 Flash File / Stock ROM

• Download Latest SP Flash Tool
• Download Stock ROM For Yezz E425 || Credit: firmwarefile website

HOW TO FLASH USING SPFLASH TOOL?

Read More

HOW TO USE SP Flash Tool in easy way plus download file

Requirement

• * USB cable
  * Install VCOM drivers on the PC ( Download Find One for You )
  * The phone
  * Scatter file + files to be flashed ( Download )
  * Download SP Flash tool ( Download  )

Steps to follow:
1. Remove the battery from the phone and slot it back in without booting the phone (If the battery is inbuilt then simply switch if off). Also, ensure there’s a formatted SD card in the phone (if there’s an SD card slot)
2. Launch SP Flash Tool as Administrator

3. Click on Scatter-loading by the right

4. In the window that pops up, select the scatter file for your phone model then click Open (scatter file is a text file with the word “scatter” in its name )

5. A list with ticked boxes should appear in SP flash tool (preloader, mbr, ebr etc)

6. ~~~~
Step 6 is only for when you wish to format the phone. Skip if you don’t wish to format
6a. Click Format at the top
6b. After clicking Format, a dialogue box will pop up, ensure that ‘Auto Format Flash’ and ‘Format whole flash without Bootloader’ are selected
6c. Click OK, Stop should now be red or green in color
6d. Connect the switched off phone (with battery inside) to the PC via USB cord
6e. A progress bar should load till you get a ‘Success’ message (green circle with OK)
6f. Disconnect the phone from PC
~~~~~~
7. Untick the box in front of any item you do not wish to flash

8. To manually load an item that doesn’t automatically get ticked after loading the scatter file, tick the box in front of that item then double-click its Location and select the corresponding file in the window that pops up
9. Once the file(s) you wish to flash is (are) ticked, click Download (with an arrow above it)

10. Stop should now be prominent while other options should be grayed out
11. Connect the switched off phone (with battery inside) to the PC via USB cord
12. A progress bar should start running

13. Wait till you get a Success message (green circle with OK), do not interrupt before then

14. Disconnect the phone, remove the battery for 15 seconds (if removable), slot it back in then power up the phone
Credits : Hovatek

Read More

Instruction for flash LG G4 LGH818P

1. Extract/Unzip the LG Mobile Driver 4.1.1 on your PC. You’ll get a bunch of files required to run the program.
2. Download and install LG Flash Tool 2014 - KDZ Flash Software
3. Double-click/Run LGFlashTool2014.exe file to Open LG Flash Tool.
   + If it doesn’t open, install Visual C++ Runtime Library from here and then try again.
4. Boot your LG device into Download Mode:
   • Power off your LG device.
   • Press and hold Volume Up button.
   • Connect your device to PC with a USB cable while holding the Volume Up button.
   • You’ll boot into download mode with “Firmware Update” written on top of the screen.
5. Now load the .kdz firmware file into LG Flash Tool window on your PC. Click the browse button at the end of the “Select KDZ file” line. Leave every other option as is on the LG Flash Tool window.
6. Once you’ve selected H818P20h_00_1019.kdz firmware file, click “CSE Flash” button to proceed on flashing the H818P20h_00_1019.kdz firmware to your LG device.
   + FYI, the “Normal Flash” button doesn’t wipe data and the “CSE Flash” button wipes data. If you’re upgrading from a stock firmware, then “Normal Flash” might do.
7. You’ll get a “Read Phone Information” window, it will be blank for the most part. Just hit the START button and proceed.
8. You’ll be asked for administrator permissions for some LG program on your PC, accept it.
9. Now you’ll see “Select Country & Language” window. Select “Different” from the country list and then “English” from the language list. And remember to NOT tick the Smartphone upgrade checkbox, it’s for Windows Mobile phones not your LG device running on Android.
10. To finally begin firmware flashing process, hit the “OK” button.
11. You’ll see a progress bar now. Just wait until it’s 100%, after which you might get an error “Connection to server failed”. This is okay. DON’T disconnect your phone at this point.
12. Watch your phone closely, you’ll see some activity going on the screen with “COM” written in green text. Once that happens click OK to the “Connection to server failed” error.
13. Now watch the firmware update progress bar on your phone. Once it’s complete, your phone will automatically reboot. And then you can disconnect your phone from PC and close the LG Flash Tool utility as well

Read More

How to repair hang on logo LG H818p via Free Software

Hi everyone, I want to share my works this morning about Start up error or Hang up on Logo. This will happen when Virus attack on phone or system crashed. But no worries we have a solution regarding that problem and below is one of the example. And also you can follow the guide and download the tools and Stock File.

First we can try by Resetting it  via Hard Reset a combination of Holding volume up+ power button or Holding Down + Power Button until the system recovery appear. find the wipe factory then restart

Second, if can't be done by Resetting lets go to Reflashing or Reprograming

Download the Tools Here! 
and follow the instruction






 

Read More

How to solve Google Account problem or FRP on Asus_Z00LD with Cracked Tools download free

Hi everyone, I want to share my works this morning about Factory Reset Protection also known as FRP. This will happen when someone or you recently reset your phone into factory mode and after the reset you stack on google activation which were you input the original google account on the owner and without it the phone is useless. But no worries we have a solution regarding that problem and below is one of the example. And also you can follow the guide and download the tools and Stock File.

So todays FRP solution is on
Model: Asus_Z00LD

Download first the tools
UAT FRP 3.0.1 Cracked
Password 

This the screenshot served as guide just observe.


This is the process
1.hold vol+ / power for fastboot mode
2. insert usb

This is the screen of the tools please be guided



done and this is the screen shot of the finish product





Comment below if this guide help.


How to solve Google Account problem on Asus_Z00LD
How to solve  FRP on Asus_Z00LD with Cracked Tools download free
How to solve Google Account problem or FRP on Asus_Z00LD with Cracked Tools download free

Read More

How to bypass google account problem or FRP on Samsung S9 / S8+

How to bypass the Factory Reset Protection is also known FRP on Samsung S9 / S8+.

1st   -step is to Download the very easy video tutorial about bypassing  samsung S9 S8+ / S8 /S7/S6
2nd  -follow the video and with attest 8 minutes long but worth waiting then your  S8+ / S8 /S7/S6  Frp problem will be solve.

Download the video

video password

 Samsung S9 / S8 Frp bypass No Talkback,Without PC
 Samsung S9 / S8 Frp bypass No Talkback,Without PC
 Samsung S9 / S8 Frp bypass No Talkback,Without PC

Read More

How to reprogram Huawei G730-U10 with free Firmware Download

Huawei G730-U10 Firmware Download

for having a trouble like

Virus Infected

Hang on LOGO

Bootstrap (Keep Restarting)

Dead but still Detected on PC

Huawei Ascend G730 is a powered by a MediaTek 

1.3 GHz quad-core CPU and ARM Mali-450MP2 GPU with 1 GB of RAM.

Huawei G730-U10 Firmware Download

Password here

HOW TO FLASH THE FILE
1 . open the Flashtool - Download here
2. click the scatter button to load file
3.Find the scatter of the file in folder
4. Change the Download to format/download
5.click Download then wait till it's Done

Read More

Qnet levin v2 hang logo done via program

Qnet levin v2

5.5inch HD Quad-core 3G Back and front camera 5 mega pixel 7.0 nougat version Free jellycase & Temper glass 4gb rom+1gb ram

SPD sc7731G

Qnet levin v2 firmware

Password here

Read More

Myphone myA7 7.0 Firmware Dowload

myphone myA7 7.0 Firmware Dowload

• Android 7.0 Nougat Operating System
• Spreadtrum SC7731C Chipset
• 1 GB
• 8GB Internal Storage
• Expandable Up to 32 via microSD
• 3G HSPA+, 2G EDGE & GPRS Networks

Myphone myA7 7.0 Firmware Dowload

Read More

Qnet LEVIN V1 Firmware download

Qnet LEVIN V1 Firmware for CM2

*7.0 Android Nougat *5.5" HD display *RAM 1GB+ROM 4 GB *5 MP Front Camera *3500 mAh battery *1.3 GHz Quad core Processor

CPU SPD7731c

Download Qnet LEVIN V1 Firmware

Password

Read More

Clone Samsung J7+ Firmware download how to reprogram

China Samsung J7+ firmware download below for those who has a problem on this phone just like Hang on logo, Virus infected, system corrupted. so below is the image of the phone and look carefully to determine the exact or correct firmware to download.

China Samsung J7+
Android 6.0
MTK CPU
 Below is the image of the unit

Warning: Do it at your own risk, this website has no responsibility for any further problem due to using this firmware.

How to program:

Download SPtools find the latest version and open

Open Scatter loading file and find the Stock rom scatter

then format then Download

wait for a minute to the check box appears means it success

This file is 100% tested

Clone Samsung J7+ 7.0__MT6580 Firmware

Password here

Read More