How to reprogram SAMSUNG Galaxy J1 in easy way (DIY)

You can download all the firmware and usb driver of this device even the flash tools here! below is the complete link of specific device model just carefully look on what device you have and the complete guide and tutorials are gevin. Warning!.. Do it at your own Risk. Download all the important files first. If you have SAMSUNG Galaxy J1 and with a problem of system malfunction just like hanging up always, unusual lags, Virus infected, and others reason that makes your irritating face smash out. and here's  a thing... you want to take it to a Cellphone Service but too expensive cost and makes you crazy because you have no penny? well your problem is solve!... I will teach you an easy way how to reprogram your Cellphone for free in simple step by step guide. You only need is a reading skills and common sense.

Before we start the procedure let makes it clear to you this 100% sure procedure and DO IT AT YOUR OWN RISK!...

Prepare first the tools and download it also for free!...
Samsung Galaxy J1 Firmware 
Samsung Usb Driver
Programmer Odin 3.10
Usb Cord (CP-PC)
Of course a PC or Laptop

After you have collected these all tools, We are ready to rumble...
This procedure is best for
SAMSUNG Galaxy J1 SM-J100ML/DS /J100MLDXUOAPB1/J100MLDXU0APB2

Step 1-   Alright here we go, put your Samsung J1 first on download mode by pressing volume down+ home+ power on for at lest 3-5 seconds then if the Samsung logo appears, release the power on key while still holding volume down and home key until the download mode appears. when you are on the first screen select continue to download mode by pressing down and boom... you are now on the download mode 

(see guide for Download mode guide on Samsung)

Step 2-   So stay your phone in download mode and let's proceed. Connect your phone to detect drivers, (The link for drivers are already given above links just download it and install)  allow the computer to identify your model and drivers.

Step 3-   After finished downloading and installing the drivers, you are ready to program. Just open your downloaded Programmer ODIN 3.10 and make sure your phone are detected by Odin by seeing the comport number at the first box just like this..

                                  

Remember if your phone or comport does not show like image above, repeat the procedure 1-2 to make sure you are properly install the drivers and putting it in download mode! If you see the comport on the Odin in your computer and have not same numbers,it doesn't matter the number as long it detect it's alright!... then lets proceed!

Step 4-   Extract your downloaded Firmware as the link given above and in your Odin click the AP and find the firmware you downloaded and wait and the start is ready... press the start and wait a minute until it finish.

After finished Programming it will looks like this

Alright guys that's all... hope it will help you... and if your phone is now in good condition due to this Guide kindly leave a feedback I will happy for that... comment below